SeraPool Natural Silver Travertine Porcelain Deck Trims & Edges
Sold by the Piece
Custom order: produced for your project and shipped direct from the factory. Lead time is confirmed with your quote.
SeraPool Natural Silver Travertine Porcelain Deck Trims & Edges are the matching step, edge and corner pieces for Silver Travertine pool deck tile, part of the SeraPool Natural™ Outdoor & Pool Collection.
Each piece carries the same silver-gray Silver Travertine surface, so deck steps, raised edges, outside corners and pool steps finish in the same color as the deck. Rounded and coved pieces remove sharp edges and corners for safer barefoot areas.
Pieces and sizes
| Piece | Size | Thickness | Use |
|---|---|---|---|
| Step tread, slip-resistant (ST / OST) | 13x26 in. (33 x 66 cm) | 5/16 in. (7.6 mm) or 3/4 in. (18 mm) | Pool steps and benches, with rounded front edge |
| Step tread with right or left return (SCR, SCL / OSCR, OSCL) | 13x26 in. (33 x 66 cm) | 5/16 in. or 3/4 in. | End of a step run where the side edge is exposed |
| Infinity-edge tile, single or double finished edge (IT / OIT) | 13x26 in. (33 x 66 cm) | 5/16 in. or 3/4 in. | Vanishing (infinity) edges and exposed pool walls |
| Convex piece (DB) | 2x13 in. (4 x 33 cm) | — | Rounds off outside edges |
| Convex corner, 2-way / 3-way (DBA / DBK) | 2x2 in. (4 x 4 cm) | — | Outside corners where two or three edges meet |
| Concave (cove) piece (IB) | 2x13 in. (4 x 33 cm) | — | Coved floor-to-wall and wall-to-wall transitions; easier cleaning for robotic cleaners |
| Concave corner, 2-way / 3-way (IBA / IBK) | 2x2 in. (4 x 4 cm) | — | Inside corners where two or three coved edges meet |
| Angle trim, L-trim (DK) | 2x2x13 in. (4 x 4 x 33 cm) | — | Finishes exposed edges |
Technical specifications
| Material | Porcelain |
|---|---|
| Water absorption | Eb ≤ 0.5% (EN ISO 10545-3) |
| Slip resistance | PTV ≥ 45, wet pendulum (EN 16165 Annex C) |
| Frost and thermal shock | Resistant (EN ISO 10545-12, EN ISO 10545-9) |
| Chemical resistance | Class A, including swimming pool salts (EN ISO 10545-13) |
| Sold by | Piece; made to order |
Installation notes
- Set with the same C2TE S1 deformable cementitious adhesive (EN 12004) or ANSI A118.15 improved modified mortar used for the deck tile.
- Use 3/4 in. step treads and infinity-edge tile where the edge takes heavy foot traffic or needs extra strength.
- Grout no sooner than 24 hours after setting; finish corners and movement joints with an exterior-grade sealant.
Matching Silver Travertine pool-deck system
Every piece below is made in the same Silver Travertine color, so coping, gutter grates, drains and deck tile finish as one surface:
- Silver Travertine deck tile
- Silver Travertine slot overflow coping
- Silver Travertine slot overflow edge tile
- Silver Travertine one-piece pool coping
- Silver Travertine bullnose pool coping
- Silver Travertine flat pool coping
- Silver Travertine flexible gutter grates
- Silver Travertine drain grates
- Silver Travertine concealed drain grates
- Silver Travertine deck drain channel
Ordering and lead time
SeraPool Natural is made to order for each project and shipped direct from the factory to the job site, with crates marked for your project. Send drawings or pool and deck dimensions and we will list every coping, corner, grate and drain piece on one quote; quantities, freight and lead time are confirmed per project.
Project resources
Choose options