SeraPool Natural Pool Mix Porcelain Pool Trims & Edges
Sold by the Piece
Custom order: produced for your project and shipped direct from the factory. Lead time is confirmed with your quote.
SeraPool Natural Pool Mix Porcelain Pool Trims & Edges are the matching step, edge and corner pieces for Pool Mix pool field tile, part of the SeraPool Natural™ Outdoor & Pool Collection.
Each piece carries the same multicolor slate-look Pool Mix surface, so steps, infinity edges, outside corners and floor-to-wall transitions finish in the same color as the pool interior. Rounded and coved pieces remove sharp edges and corners for safer pool details.
Pieces and sizes
| Piece | Size | Thickness | Use |
|---|---|---|---|
| Step tread, slip-resistant (ST / OST) | 13x26 in. (33 x 66 cm) | 5/16 in. (7.6 mm) or 3/4 in. (18 mm) | Pool steps and benches, with rounded front edge |
| Step tread with right or left return (SCR, SCL / OSCR, OSCL) | 13x26 in. (33 x 66 cm) | 5/16 in. or 3/4 in. | End of a step run where the side edge is exposed |
| Infinity-edge tile, single or double finished edge (IT / OIT) | 13x26 in. (33 x 66 cm) | 5/16 in. or 3/4 in. | Vanishing (infinity) edges and exposed pool walls |
| Convex piece (DB) | 2x13 in. (4 x 33 cm) | — | Rounds off outside edges |
| Convex corner, 2-way / 3-way (DBA / DBK) | 2x2 in. (4 x 4 cm) | — | Outside corners where two or three edges meet |
| Concave (cove) piece (IB) | 2x13 in. (4 x 33 cm) | — | Coved floor-to-wall and wall-to-wall transitions; easier cleaning for robotic cleaners |
| Concave corner, 2-way / 3-way (IBA / IBK) | 2x2 in. (4 x 4 cm) | — | Inside corners where two or three coved edges meet |
| Angle trim, L-trim (DK) | 2x2x13 in. (4 x 4 x 33 cm) | — | Finishes exposed edges |
Technical specifications
| Material | Porcelain |
|---|---|
| Water absorption | Eb ≤ 0.5% (EN ISO 10545-3) |
| Slip resistance | PTV ≥ 45, wet pendulum (EN 16165 Annex C) |
| Frost and thermal shock | Resistant (EN ISO 10545-12, EN ISO 10545-9) |
| Chemical resistance | Class A, including swimming pool salts (EN ISO 10545-13) |
| Sold by | Piece; made to order |
Installation notes
- Set with the same C2TE S1 deformable cementitious adhesive (EN 12004) or ANSI A118.15 improved modified mortar used for the field tile, rated for submerged use.
- Use 3/4 in. step treads and infinity-edge tile where the edge is exposed to foot traffic or needs extra strength.
- Grout no sooner than 24 hours after setting with a flexible, pool-rated grout; finish corners and movement joints with a pool-rated sealant.
Ordering and lead time
SeraPool Natural is made to order for each project and shipped direct from the factory to the job site, with crates marked for your project. Send drawings or pool dimensions and we will list every step, edge and corner piece on one quote.
Project resources
Choose options